The grayed items on the screens have fixed settings and are not user-configured. Drive A Allows you to configure your floppy drive A. If you remove the jumper cap, or place the jumper cap on just one pin, the jumper is OPEN. To better fit local market requirements and enhance product competitiveness, your regional office MAY have decided to extend the functionality of a machine e. Chapter 2 18 Product Information The screen below appears if you select Product Information from the main menu: Enabled Sets the NumLock status when the system is powered on. Standard Cmos Features
Shutting Down Computer For whatever reasons a part number change is made, it will not be noted in the printed Service Guide. Supervisor Password has higher priority than User Password. Acerpower S Front Panel Refer to the table below for information: Pentium 4 and Celeron are trademarks of Intel Corporation. Setting to Off will allows users to use the arrow keys on the numeric keypad.
The system reboots immediately after you exit Setup.
Option [Press Enter] [Press Enter] [Press Enter] Chapter 2 Power Management The Power Management menu lets you configure your system to most effectively save energy while operating in a manner consistent with your own style of computer use. Disabled This option is used to set video off option.
Acer AcerPower S290 (Celeron D 352 3.2GHz, 512MB RAM, 80GB HDD, XP Pro)
If you remove the jumper cap, or place the jumper cap on just one pin, the jumper is OPEN. Optimized Defaults The following table describes the parameters found in this menu: Additional Safety Information 6.
If you only want to install setup defaults for a specific option, select and display that option. Disabled Enable smart fan control function.
Acer Power S review – Engadget
Chapter 3 36 General Information Before You Begin Before proceeding with the disassenbly procedure, make sure that you do the following: For whatever reasons a part number change is made, it will not be noted in the printed Service Guide. The password typed now will clear any previously entered aceg from CMOS memory. Advanced Chipset Features Acerpower S Disassembly Procedure Settings in boldface are the default and suggested settings.
The defaults place demands on the system that may be greater than the performance level of the components, such as the CPU and the memory. T Integrated Peripherals All onboard peripherals can be set up through this menu.
Acer AcerPower S Manuals
Notice For Australia The Product Information menu contains general data about the system, such as the product name, serial number, BIOS version, etc. European Union eu Preface Before using this information and the product it supports, please read the following general information.
Use this item to define how many milliseconds must elapse before a held-down key begins generating repeat characters. Setting to Off will allows users to use the arrow keys on the numeric keypad.
Drive A Allows you to configure your floppy drive A. Communication Devices rss The spread Spectrum function reduces the EMI generated by modulating the pulses so that the spikes of the pulses are reduced to flatter curves.
T Wrist grounding strap and conductive mat for preventing electrostatic discharge.
Acer AcerPower S290-UC4201P (Celeron 420 1.6GHz, 512MB RAM, 80GB HDD, XP Pro)
Activity of selected IRQ always awakens the system. Setting Jumper Use the motherboard jumpers to set system configuration options. Power Management Function acpi Support Function Do not include the schematic when create netlist.
NOTE Gives bits and pieces of additional information related to the current topic. Pentium 4 and Celeron are trademarks of Intel Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of Acer Incorporated.
Asking For Technical Assistance You will be asked to confirm the password.