Ask one of our advisors. Operate your home cinema system with the Proximus TV remote control. The led will light up. Do you have a question? Connect the PLC to the set-top box using an Ethernet cable. Did you find this helpful?

The following buttons cannot be reprogrammed: You have bought your PLC separatly? Connect the PLC to the set-top box using an Ethernet cable. Press the button to select the device on which the commands will be recorded. You will need at least two PLC: Plug the device in to an electrical socket.

I find it hard to find the right info Other. You’re very welcome to explore our private website.

Proximus TV manual and installation guide

Anything else you want to share with us? Operate your home cinema system with the Proximus TV remote control. The WPS leds on the two devices will light up. The indicator will light up.

Did you find this helpful? Did you find this helpful? The modem will reboot automatically. Anything else you want to share with us? You cannot control your home cinema with this remote control.

Ask one of our advisors. If the code is not valid, the red indicator will flash once. Install your Wi-Fi Bridge. PLC adapters awnsluiten you to connect your b-box modem to your set-top box over the electric power network. What do we need to change?

Install your Wi-Fi Bridge | Proximus

Before starting, we ask you to pick up the remote control of your home cinema set and your Proximus TV remote control. Within 2 minutes, the led will light up. The led will light up. Unplug the additional PLC and plug it yome in the room of your choice. The following buttons cannot be reprogrammed: Within the next two minutes, press the button on the side of the PLC velgacom just plugged in.

  FLAME AND CITRON ENGLISH SUBTITLES WATCH ONLINE

B-box 3 and Wi-Fi Bridge. Switch it on by pressing the button on the back of the Wi-Fi Bridge. Plug in the second PLC near your set-top box.

Your Wi-Fi Bridge is in transmitter mode.

Installation of the PLC adapter | Proximus

This way the latter will receive the codes via infra-red signals and the functions will be copied to it. Plug the device in to an electrical socket. You have now finished configuring and installing your PLC. You have moved your b-box or your set-top box? Did you find this helpful? Click on your remote control and follow the steps below Remote control V6. If you have several decodersinstall one Wi-Fi Bridge per decoder.

Upgrade your b-box 2 Call 96 Ask one of our advisors. Connect the PLC to the set-top box using an Ethernet cable. B-box 2 and Wi-Fi Bridge. Transmitting the codes to the Proximus TV remote control Place dexoder remote control of the device in front of the Proximus TV remote control.

  PREMIERE PRO WARP STABILIZER CRASH

The installation will depend on the type of modem you have: What do we need to change?

To finish, press the button. Do you have a question? After said 3 seconds the red indicator of the device concerned will flash twice and then stay on. This info is not clear or incomplete I want more images, videos The red indicators will not be lit while you do so.

I find it hard to find the right info Other.

After that you can install as many PLC as you like in your home. Ask one of our advisors. For example, you can copy your home cinema’s volume control to the Proximus TV remote. This info is not clear or incomplete I want more images, videos The led remain lit on the second Wi-Fi Bridge: Connect your PLC to the b-box using an Ethernet cable. Plug the Wi-Fi Bridge in to an electrical socket. You’re very welcome to explore our private website.

If the code is valid, one of the red indicators will flash twice as confirmation.